Every December, contractors hear the same Section 179 advice: buy a new truck before New Year’s and write it off. Sometimes that’s a smart move. More often, it’s a reflex that costs more cash than it saves.
Here’s how Section 179 for contractors actually works in 2026. You’ll also get the five mistakes we see every year, plus a five-question test for when a December purchase really pays off.
Short answer: only if you needed the truck anyway. Section 179 lets contractors deduct the full cost of qualifying equipment in the year it’s placed in service, up to $2,560,000 for 2026. But an equipment write-off is a discount, not a refund. At a 30% combined tax rate, an $80,000 truck saves about $24,000 in tax. You’re still out $56,000.
Key takeaways:
Normally, you deduct a truck or excavator a little at a time over several years. Section 179 lets you deduct the whole cost in year one. It covers most things contractors buy: work trucks, trailers, skid steers, tools, computers and off-the-shelf software.
Bonus depreciation does a similar job with different rules. The 2025 tax law made 100% bonus depreciation permanent for qualifying property acquired after January 19, 2025. Most of the time, your accountant picks whichever works better for your situation. The IRS’s Publication 946 has the full federal rules.
| Section 179 | 100% bonus depreciation | |
| 2026 dollar limit | $2,560,000 | No cap |
| Phase-out | Starts at $4,090,000 of purchases | None |
| Income limit | Can’t exceed business taxable income (extra carries forward) | None; can create a loss |
| Heavy SUVs (6,001–14,000 lbs) | $32,000 cap | Remaining cost may qualify |
| Illinois return | Generally follows federal | Added back; recovered over time |
| Wisconsin return | Follows federal | Not followed |
Here’s the math nobody prints on the window sticker. Spend $80,000 to save roughly $24,000, and you’re $56,000 poorer than if you’d kept your old truck.
If you’d buy the truck in March, the deduction is a nice bonus. If you wouldn’t, the tax break isn’t a reason. It’s a rationalization, and it’s the core Section 179 mistake contractors make every year.
Section 179 doesn’t care when you signed or paid. It cares when the equipment was ready and available for its job. For 2026, that means placed in service by December 31, 2026.
A truck ordered December 15 and delivered January 6 is a 2027 deduction. Late-December dealer inventory runs thin, and upfitting (racks, dump beds, plows) adds weeks. Get it delivered, titled and working before the 31st, and keep the paperwork that proves it.
Your federal return and your state return can tell two different stories. Illinois doesn’t follow federal bonus depreciation. You add it back on the Illinois return and recover it over time on Form IL-4562.
Wisconsin goes further. It doesn’t follow federal bonus depreciation at all, though it does follow federal Section 179. So for Wisconsin contractors, the choice between Section 179 and bonus depreciation can change the state bill even when the federal number looks identical. Our guide to Illinois tax laws for small business owners covers more of these state-versus-federal gaps.
Section 179 can’t exceed your business’s taxable income. Anything over that carries forward. A deduction also saves less in a lean year than in a strong one, because your tax bracket is lower.
Then there’s the trade-in. When you sell or trade a truck you fully expensed, much of that deduction comes back as ordinary income. The same thing happens if business use drops to 50% or less. This Section 179 recapture catches contractors who swap trucks every three years. It’s also a big reason behind the surprise tax bill.
You can generally deduct the full cost of a financed truck, which is a big part of the appeal. But the payments start in January, right when outdoor work slows down across northern Illinois and Wisconsin.
The tax savings show up in April. The payment shows up in January. If your winter cash is already tight, a new note can hurt more than the deduction helps. Solid job costing tells you whether your spring work can carry it.
Go ahead and buy if you can say yes to all five:
Five yeses? Buy the truck. Anything less, and waiting is usually the better tax move. If you’re also weighing other year-end tax planning moves, our year-end tax moves post walks through the rest of the list.
If a year-end equipment purchase is on your mind, call your accountant this week, not on December 30. Bring three things: your year-to-date P&L, next year’s equipment list, and realistic delivery dates from your dealer.
That conversation is the whole point of year-round tax planning. It turns Section 179 for contractors from a December scramble into a decision you make on purpose. If you run a construction business, our contractor accounting page shows what that looks like month to month.
For tax years beginning in 2026, the maximum Section 179 deduction is $2,560,000. It phases out dollar for dollar once qualifying purchases pass $4,090,000 and disappears at $6,650,000 (IRS Rev. Proc. 2025-32).
Yes. The equipment must be placed in service by December 31, 2026 to count on a 2026 return. That means ready and available for its intended use. Ordering or paying for it isn’t enough.
Generally, yes. The deduction is based on the truck’s cost, not the cash you’ve paid so far. The vehicle must be used more than 50% for business, and heavy SUVs have a $32,000 Section 179 cap for 2026.
Both generally follow federal Section 179. Neither follows federal bonus depreciation: Illinois requires an add-back that’s recovered over time, and Wisconsin doesn’t allow it. Your state deduction can differ from your federal one.
Not sure whether you need a good tax return or a real tax plan? Take our 7-question package quiz and see which level of help fits your business.
This article is provided for general informational purposes only and does not constitute tax, legal, accounting, or financial advice. Every business situation is different. Before acting on anything you read here, please consult with a qualified advisor — including, we hope, us. Reach out to Accounting Freedom or Payroll Freedom for guidance specific to your situation.
Frank Fiore, CPA, is the Visionary at Accounting Freedom and its sister brand, Payroll Freedom, with offices in Mundelein, Illinois and Grafton, Wisconsin. The firm has served small businesses since 1981, including contractors, medical practices, restaurants and family-owned companies.
Every December, contractors hear the same advice. Buy a new truck before New Year's and write it off. Sometimes that's smart. A lot of the time, it costs you more cash than it saves. Let me show you the math.
Section 179 lets you deduct the full cost of qualifying equipment in the year you put it to work. Trucks, trailers, skid steers, tools. That sounds like free money. It isn't. A write-off is a discount, not a refund.
Say you spend $80,000 on a truck, and your combined tax rate is around 30%. The deduction saves you about $24,000 in tax. You're still out $56,000. If you wouldn't have bought that truck anyway, you didn't save anything. You spent.
Now here's where contractors get tripped up. First, the deadline. The equipment has to be placed in service by December 31st. Not ordered. Not paid for. Working. A truck that gets delivered on January 6th is next year's deduction.
Second, your state. Your federal return and your state return can tell two different stories. Some states don't follow the federal depreciation rules, so the number you're counting on can shrink.
Third, cash. If you finance the truck, the payments start in January, right when work slows down. The tax savings show up in April. The payment shows up in January.
So here's my test. Would you buy this truck in March? Can it be delivered and working by December 31st? Can your cash handle January through March? Is this year's income higher than you expect next year's to be? And has your accountant run the numbers on both your federal and your state return? If you can say yes to all five, buy the truck. If not, waiting is usually the better tax move.
And call your accountant this week, not December 30th. Bring your year-to-date profit and loss, your equipment list, and a real delivery date from the dealer. Our full breakdown is linked below.